When purchasing a used car, it is always possible that the previous owner of the vehicle had not maintained or that there is severe damage due to a collision or flood. As a general guide, you should always rely on a mechanic like Independent BMW Repair Specialist to test your used car before purchasing. However, it is still good to know how to inspect the car yourself. How should i inspect a used car?  Here’s how to inspect a used car

Inspect Internal Mechanical Processes.

Inspecting internal mechanical processes means properly inspecting the paddle and seat configuration function. Remember to pay special attention to the paddle. They should not cause excessive damage.

Check Engine

Check the normal state of the engine. If the engine is dirty, it states that the car was not well maintained. If the oil color is dark black, it may mean that the car did not have regular oil changes. Also inspect that the bayonet end is not beige, the end seems fluid. This may indicate a leak in the liquid head gasket. After starting the engine, listen to the engine. If you hear noise and bumps, immediately leave this vehicle

Check Transmission

For manual transmission, inspect that the clutch and all gears are running smoothly. The clutch should not be too rigid when stepping, and the change should be easily made from low to high, high to low. For automatic transitions, see Dipstick to obtain the correct fluid level. Also, try to sniff the level bar. If it smells burnt, don’t buy the car.

Check Suspension

While driving the car for a test drive, hear loud noises while crossing irregular roads. Noise and elastic driving showed that the shock absorber is worn. You can also check the shock absorber by pressing enough to fix the vehicle. It should bounce only once. This often means that the shock absorber must be replaced, which can be expensive.

Check the Steering and Brakes

Ensure that the steering is not heavy and that the car does not turn in one direction. If the vehicle turns rapidly to the left or right, it is necessary to align the wheels or change worn tires, as well as inspect that the brake provides good resistance and does not fall to the floor after stepping.

Test All Car Doors

Open and close all vehicle doors. When doing this, inspect that there are no loose hinges or other problems, such as damaged doors or panel misalignments.

Test Trunk And Hood.

All cars should have a good trunk and hood. Try opening and closing all. Check alignment and corrosion and damaged hinges.

In general, it is easy to inspect the used cars correctly before purchasing it. If you follow these steps, you can fully inspect yourself. It is easy to inspect a used car as long as you know what signs to look for.